Manilla Water Is Hard — Here's What It Costs You Each Year
9 GPG · 155 ppm · +38% vs Canadian average · 2025 report
Source: City of Kawartha Lakes, 2025 report
HardManilla water is hard at 9 GPG (155 ppm). Scale and spotting are noticeable, and a softener or conditioner is worth considering.
How we calculate this: based on the Battelle Memorial Institute study commissioned by the Water Quality Association (WQA), hard water is estimated to cost the average affected household roughly $800/year in 2010 dollars (~$1,230 today, after ~54% inflation). We scale that by 9 GPG versus a ~10 GPG reference. The percentages above come from the Battelle Memorial Institute study (commissioned by WQRF), the US Department of Energy, and the Water Quality Association. This is an estimate — not a certified per-household figure — and actual savings vary by water use, fuel type, and local rates.
Hardness
Parts per million
vs Canadian average
Contaminants in water
How Manilla Compares
Water hardness scale
| Classification | Grains per gallon (GPG) | mg/L (ppm) | What it means |
|---|---|---|---|
| Soft | 0–3.5 | 0–60 | No scale; softener unnecessary. |
| Slightly Hard | 3.5–7 | 60–120 | Minor spotting; conditioning optional. |
| Hard← your water | 7–10.5 | 120–180 | Visible scale; softener recommended. |
| Very Hard | 10.5+ | 180+ | Heavy scale; whole-home softener strongly recommended. |

Why Is Manilla Water So Hard?
Manilla sits in the City of Kawartha Lakes, and its drinking water comes from the Manilla Drinking Water System, which draws from surface water sources. That’s the key to understanding the hardness here. This isn’t a deep-well situation where water sits in underground rock for decades. Instead, the water is pulled from lakes and surface reservoirs that are part of the Kawartha Lakes watershed.
Here’s what happens. Rain and snowmelt run across the land and into these lakes, and along the way the water picks up minerals from the soil and bedrock. The Kawartha Lakes region sits on a foundation of Paleozoic limestone and dolomite. These are sedimentary rocks made largely of calcium and magnesium carbonates. Water is a decent solvent, especially when it’s slightly acidic from dissolved carbon dioxide. As it moves through and over this limestone-rich terrain, it chemically weathers the rock, pulling calcium and magnesium ions into solution. That’s the whole story of your hardness: the water is literally dissolving the local bedrock.
The numbers bear this out. At 9 GPG (155 ppm), Manilla’s water falls into the “hard” category on the USGS scale, which classifies anything above 7 GPG as hard and above 10.5 GPG as very hard. The national average is about 7.3 GPG, so Manilla runs a bit above that. The detected calcium and magnesium in the water are exactly what you’d expect from this geology. Fluoride also shows up, which is common in many surface water systems, but hardness itself is not regulated by the EPA as a health hazard. It’s purely an aesthetic issue under the Secondary Maximum Contaminant Level. That means the water is safe to drink, but it will leave scale on your fixtures and make soap less effective.
One thing worth understanding is that surface water hardness can fluctuate more than groundwater. After heavy rains or during spring runoff, the mineral content can shift as water moves through different soil layers. But the underlying geology doesn’t change, so Manilla’s water stays consistently hard year-round.
How Manilla Compares to Nearby Cities
Manilla is part of the broader City of Kawartha Lakes municipal system, and the surrounding communities in this region draw from the same surface water sources within the Kawartha Lakes watershed. That means the water chemistry is broadly similar across the area, though exact hardness can vary slightly depending on which specific intake or treatment plant serves a given community.
The practical effect is that if you live in Manilla and have hard water problems, your neighbors in nearby towns are dealing with the same thing. Scale on faucets, film on glassware, stiff laundry, reduced water heater efficiency. None of that is unique to Manilla. It’s a regional characteristic driven by the same limestone geology and the same surface water sources.
The differences you might notice between communities come down more to treatment than to source. Different plants may use different softening or conditioning approaches, which can change the water’s feel at the tap. But the raw water entering those plants is coming from the same type of surface water running over the same mineral-rich bedrock.
If you’re comparing Manilla to a city that draws from a different source entirely, say a deep aquifer or a river with a different watershed, that’s where you’d see real differences. But within the Kawartha Lakes area, hard water is the norm, not the exception. You’re not imagining it, and you’re not alone in dealing with it. The limestone under this whole region guarantees it.
How does Manilla stack up against the rest of Ontario? It's hard at 9 GPG — Woodstock, Guelph, and Ingersoll sit nearby with different numbers. See the full hardest-water ranking for context.
See where Manilla sits on the Ontario water hardness map →
Want the broader explainer on what hardness actually is and how it behaves? Read hard water vs. soft water, explained.
What 9 GPG Actually Does to a Manilla Home
At 9 GPG, hard water stops being subtle in a Manilla home. Here's what it actually does:
- Water heater efficiency drop. The US Department of Energy (and its equivalent studies) attribute scale as the single biggest efficiency killer in hard-water homes — at 9 GPG, your heater operates roughly 7% below where it would on soft water, which shows up directly on the energy bill.
- Fixture and glassware scale. White mineral deposits build on faucets, showerheads, and dishes within weeks of cleaning.
- More detergent. The Water Quality Association notes hard water can require 50–75% more soap to achieve the same cleaning — and fabrics wear faster from mineral abrasion in the wash cycle.
- Shortened appliance life. Dishwashers, washing machines, and water heaters accumulate internal scale that quietly cuts their service life.
The Battelle Memorial Institute's study — commissioned by the Water Quality Research Foundation — is the cleanest proof: water heaters on untreated hard water failed in under 2 years of the 10-year test, while identical units on softened water ran the full decade. The mineral damage is real and measurable.
Do You Need a Water Softener in Manilla?
Yes, for most homes. At 9 GPG, Manilla water is hard enough that a whole-house ion-exchange softener pays for itself — through longer appliance life, less detergent, and less descaling. The Battelle water-heater finding alone (untreated units failing in under 2 years) makes the case at this hardness.
At 9 GPG a salt-free conditioner will reduce scale but won't remove the minerals — you'll still get the soap and skin effects. For actual softening, ion exchange (a traditional softener) is what removes hardness.
What Size Softener Does Manilla Need?
Sizing a softener is a two-number equation: your household's daily water use × your hardness. The rule of thumb is grains per day = (people) × (75 gallons) × (GPG).
- At 9 GPG, a family of four uses roughly 2,700 grains of hardness per day.
- A 32,000–48,000-grain softener regenerates roughly every 9–14 days — within the 3–7 day window that keeps salt and water use efficient.
- Round up, not down: an undersized unit regenerates too often and wastes salt. Metered (on-demand) regeneration saves the most salt and water.
For Manilla at 9 GPG, a 32,000–48,000-grain metered softener is the safe default for a 3–4 person home. A larger household, or one with unusually high water use, should size up to 64,000 grains.
What Are the Signs of Hard Water in a Manilla Home?
At 9 GPG (155 ppm), Manilla residents notice significant hard-water effects. The USGS classifies water above 7 GPG as hard and notes it causes measurable physical damage to plumbing and appliances.
- White or grey crust on faucet aerators, showerheads, and around drains — calcium carbonate depositing as water evaporates.
- Spotty glassware even after a full dishwasher cycle — mineral film left behind when water dries.
- Falling water-heater efficiency — scale insulates the heating element, forcing the unit to work harder and pushing up the energy bill.
- Flat, stiff hair — calcium bonds to hair proteins and prevents shampoo from rinsing clean.
- Dry, itchy skin — dissolved minerals disrupt the skin's moisture barrier.
- Weak soap lather — hardness ions react with soap to form insoluble scum instead of suds.
- Shorter appliance life — washing machines, dishwashers, and coffee makers accumulate internal scale.
The Battelle Memorial Institute study commissioned by the Water Quality Research Foundation found untreated very-hard-water heaters failed in under 2 years, versus a full 10 years on softened water. At Manilla's 9 GPG, that equipment degradation compounds faster than most homeowners expect.

Best Treatment for Manilla Homes
At 9 GPG you want actual removal, not just scale prevention. Two pieces of equipment cover most needs:
Aquasana SimplySoft 40,000-Grain Softener
A metered whole-house salt-based softener sized for Manilla's 9 GPG. Removes hardness minerals via ion exchange for genuinely soft water — no more scale, spotting, or stiff laundry. 40,000-grain capacity regenerates about weekly for a typical 3–4 person home.
check current price
See on Aquasana →Aquasana SmartFlow Reverse Osmosis (drinking water)
The under-sink RO handles everything you drink. Removes lead, arsenic, fluoride, mercury, and PFOA/PFOS — then remineralizes for taste. The higher-purity companion to a whole-house softener or filter.
check current price
See on Aquasana →
A whole-house water softener pays for itself in roughly 11 months at Manilla's hardness level — after that, the savings accrue every year.
How Do You Test Water Hardness in Manilla?
This page reports Manilla's system-wide average (9 GPG), but your tap can vary slightly by neighborhood, pipe age, and in-home filtration. For a step-by-step, see how to test your water hardness at home — it walks through test strips, the free soap-shake check, TDS meters, titration kits, and certified lab tests.
- Test strips (~$10) give a GPG reading in about 30 seconds and are accurate enough to decide whether to invest in treatment.
- TDS meter (~$15) measures total dissolved solids, a rough hardness proxy — but it doesn't separate hardness from other minerals.
- Lab test — most water treatment companies in Manilla offer free in-home tests (expect a sales pitch); for an independent result, the EPA maintains a list of certified labs.
Note: the EPA doesn't regulate hardness (it's a nuisance, not a health hazard), but the EWG Tap Water Database tracks contaminants above health guidelines for Manilla's utility — see our Manilla water-quality report for what's actually been detected.
What about Manilla water quality?
Hardness is separate from safety. Manilla's water meets all Health Canada legal limits — 3 detected contaminants, none above the limit.
The ones people actually ask about:
Compare Manilla to Other Ontario Cities
Other Hard Water Cities
Explore More
Frequently asked questions
Is Manilla water hard or soft?
Manilla, Ontario water is hard at 9 grains per gallon (155 ppm). That is considered hard enough to cause scale buildup and spotting.
How much does hard water cost the average Manilla household?
Based on the WQA-commissioned Battelle Memorial Institute study, hard water is estimated to cost the average affected household roughly $800/year in 2010 dollars (~$1,230 today after ~54% inflation) — an estimate, not a measured per-household figure. Scaled to Manilla's 9 GPG hardness, that works out to about $1,107/year (or ~$92.25/month) for a typical home — see the calculator on this page for the full breakdown.
Does Manilla need a water softener?
Likely — at 9 GPG you'll see spotting and scale, and a softener or salt-free conditioner will help.
Why is Manilla's water hard?
Hardness comes from the geology of Manilla's water source. City of Kawartha Lakes Manilla Drinking Water System (surface/groundwater) dissolves calcium and magnesium as water moves through the ground, and those dissolved minerals are what "hard water" means.
How do I test my water hardness in Manilla?
Use a home test kit (test strips for a quick read, or a TDS meter for dissolved solids), or check your utility's annual Consumer Confidence Report (CCR). For lab-accurate results, send a sample to a certified lab.
Who supplies Manilla's water?
Manilla water is supplied by City of Kawartha Lakes. Its annual water quality report (Consumer Confidence Report) is the authoritative source for local hardness and contaminant levels.
What's the difference between grains per gallon and ppm?
1 GPG (grains per gallon) equals 17.1 ppm (mg/L). To convert: 9 GPG × 17.1 = ~155 ppm. Water is "hard" above roughly 7 GPG (120 ppm).
Sources & data
Hardness and water-quality data compiled from authoritative public sources.
- City of Kawartha Lakes — primary hardness/water-quality source
- City of Kawartha Lakes — annual water quality report (CCR)
- Health Canada — Guidelines for Canadian Drinking Water Quality
- Government of Canada — Water quality
- USGS — Water Hardness
- Water Quality Association — Scale & Hardness
- EPA — Drinking Water Regulations
Recommended solutions for Manilla
We may earn a commission when you buy through links on our site. This doesn't affect our recommendations. Full disclosure.
💧 Don’t rely on old numbers
These numbers change as new data comes out. Get notified when they get updated, and get our take on what to do about it. Unsubscribe anytime.
💧 Water treatment pros: this page is yours to share
This page helps customers understand their water's risks and costs — so they can weigh whether service is worth it. We recommend sharing this page along with our hard water vs soft water guide in your next quote or follow-up to fully explain the value of your services.